10,000G Oil Separating Centrifuge

Description

• Designed, made and tested in USA.
• Submicron Particulate Removal
• Forced Ventilation exhausts vapors released during processing waste oils or biodiesel. Prevents contamination of clean oil by water vapor and ventilates methanol vapors.
• Clean oil and dirty oil are separated by an internal dam
• Feed plate distributes oil evenly around circumference does not channel oil into a few small spots or use a wobbly cone.
• 1.5  hp industrial electric motor.
• 120 / 240V single phase or 3 phase 230V/460V pre-wired motors available.
• Footprint fits on top of 55 gallon drum.
• Belt overdrive system drives the high-speed rotor while the motor runs at 1800 rpm for a quieter, cooler running, longer lasting centrifuge.
• Large 1 gallon displacement bowl that filters 360 to 1000 gallons of oil per day.
• 165 cubic inches sludge capacity.
• Input ¼ inch NPT. Output 1¼ inch NPT.
• Operating load is taken by 1-inch diameter spindle with replaceable bearings, not the motor bearings as with some other centrifuges.
• Bowl is removed by the quick release spindle in less than a minute.
• Heavy duty 1 inch thick aluminum centrifuge body for rigidity and minimal vibration.
• Rotor is machined aircraft grade aluminum casting.
• Machine weight 120 pounds nominal.
• 15 minutes from box to operation.