Description
Filters are great but they can be a pain.
Sometimes they clog to quickly, are expensive to replace or downright messy to work with. When working with smaller micron particles or semi-solid sludge, filters can really clog up quick. Flow is also restricted and causes other issues with blowouts and imprecise filtration.
Eliminate filters:
Bowl centrifuges allow for the elimination of filters, bypassing them entirely. They work by a forced separation of the particles and fluids of different densities. The denser fluids, mainly particles, will be trapped in the bowl, while the clean fluid is continually expelled out of the bottom port.
- Cleans faster and better than filters
- Fast processing with single pass filtration at 60 gallons/hour+
- Effortless cleaning with sanitary curves
- Easy to setup, run and maintain
- Durable with tough, sanitary surfaces
This centrifuge works to clean all types of fluids. It’s commonly used with water, raw oil, wines, algae solutions, juices and more! Trap small particles(less than 1 micron). Extract concentrate from your fluids like algae, algae yeast or bacteria paste. The bowl will also trap waxes, gummes, water and anything denser than your fluid.
It works best when the solids are less than 5% concentration otherwise the bowl fills up to quickly.
More features:
- Large Capacity Bowl to allow for faster process times and less cleanings
- Push Button Bowl Purge – remove the semi solid and liquid trapped in the bowl with a push button purge. This moves a tube into the spinning fluid, allowing for the ejection of the material in the bowl, out of a pipe.
- Massive Bearings for stability and longevity
- Sanitary bolts, gaskets and seals. 304 and 316 available along with electropolishing. Contact surfaces have been ground smooth.
- Plug and play controls for easy setup and use. PLC compatable.
- Safety programmed into the design. Engineered to a safety factor of 2.5 for the bowl and 10 for the shaft. Fail safes built in.
How It Works
Fluid is pumped or drained into the top of the centrifuge and it drains out of the bottom as fast as you put it in. Once you add 2.5 gallons of fluid, the clean solution will start coming out of the bottom port. You keep feeding the centrifuge until your solution is finished. Then you can stop and drain the bowl or do the purge.
Additional Technical Specs:
Specs:
3000RPM
3HP
7A at 230V. Single Phase or Three Phase Controls Available
XP Motor available
1700G
60 Gallons/Hour flow rate
2.5 gallons bowl capacity
Requires
Reviews
There are no reviews yet.